Entreq 한국총판
신제품 정보
진공관 앰프
Network Player/DAP
BBC 라이센스 스피커
서브 우퍼
PHONO EQ/헤드폰앰프
한정 세일
서울전자 추천상품
새로 입고된 제품
제품 설치기
서울전자 뉴스
A/S 센타
:::현재위치 HOME ▶ 신제품 정보 ▶ 기타 ▶ Ayon Spirit 3(에이온 스프릿)
Ayon Spirit 3(에이온 스프릿)
판매가격 :  
주문수량 :
제조사 : Ayon
합계금액 :  
  ▷ 간단한 설명
  KT 150 진공관 사용  

Ayon audio  Spirit III  진공관 인티앰프






Features & Design

Full-featured pure class-A tube stereo integrated amp or pure power amplifier

Switchable between pentode and triode mode

Ideal also for more difficult loudspeaker loads

Vacuum Tubes

The choice of signal and power tubes have a significant influence on the sound and hence on the

inspiration and joy of listening. This is not only the decision between good and bad tubes but finally

the interaction of the different types of tubes and their combination that are used in the various Ayon


Signal Path

We believe that the simplest circuits work best together with the shortest signal path. The shorter the

signal path is, the less possibility of sonic degradation from various sources, including the wire itself.

Even on the circuit boards, the copper traces are kept to a very minimum length. The completely

redesigned circuit board provides a more straightforward and direct approach to the signal paths.

●  Logical sequenced soft-start power up for extended tube life

●  Power tube and electronic protection circuit system

●  0dB negative feedback  (of any kind )

●  Ultra short signal path

●  Simplest direct circuit path for purest musical sound and high reliability

●  No solid state devices in the signal path

●  High current and low impedance design that operates tubes in the best areas their curves

●  Minimal discrete wiring for optimum signal propagation

●  Automatic and manual bias adjustment

●  No followers or buffers in the signal path

●  High quality parts throughout

●  Selector switch engages relays located near RCA jacks to switch all inputs

Power Supply

The power supplies have been further refined with new components and enhanced AC line noise

filtration. Separate power transformers, chokes and filters provide total isolation between the input

and output stages which makes this a pure power source. We also use electrolytic capacitors with

much larger storage capacity to make up for the loss in filtering when using resistors in lieu of


●  Low noise –insulated power transformers

●  Power transformer is encased, excellent damped and RFI/EMI shielded

●  Innovative power supply provides a high speed energy delivery on transients

●  Choke filtered power supply for driver stage and KT150 power amp section

●  Separate and isolated power supplies over each stage of amplification

●  High current filament-regulator for pre and driver tubes

●  Regulated DC filament supplies with soft start

●  AC power line filter to avoid noise and hash from entering into the unit.

●  High capacitance energy storage.

●  Current in-rush limiting

●  Auto sequencing - Power on cycle completes in 1 minute

Dual Grounding System

The modification of the grounding topology leads to increased rejection of noise from the power

supply and other areas. The dual grounding topology used in all of our amplifiers is quite unique to

the whole hi-end tube amplification industry. Such extensive topology provides for quieter backdrop

for which the music can unfold in its entirety. It further establishes the quick and controlled bass

response and the full bodied expression of the high frequency. The ground leg of the signal has not

been neglected and given meticulous attention in its implementation. The importance of proper

grounding cannot be over emphasized.

●  Ground switch

●  Central one-point star earth grounding

●  Dual grounding system (switchable)

Output Transformer

The super-wide bandwidth output transformer’s major strength is that it can deliver the current in the

bass, while at the same time maintaining the speed in the high frequencies, dramatically improving

the square wave response of the amplifier. The effect is a much more natural and relaxed sound with

 much better clarity, resolution and fluidity.

●  Super-wide bandwidth high performance output transformer

●  High efficiency with low insertion loss for optimal current and voltage transfer

●  Multiple tight layering and coupling for extended frequency response

●  Output transformers are sealed with an anti-resonance compound material

The type of parts used therefore must have a synergistic relationship to the circuit they are placed in.

It is this relationship of which type of part to use where, that ranks our products apart from the mass


●  Selected, premium quality passive components used in all applications

●  High speed  & high quality audiophile grade coupling capacitors

●  Special tube sockets with beryllium- copper spring pins, custom made by Ayon

●  WBT - NextGen  – speaker binding posts

●  High quality – RCA input jack

●  Neutrik/Swiss - XLR chassis connectors

●  Special isolated - internal wiring

●  Silver-copper matrix - internal signal cable

●  Gold-plated industrial grade PCB

Mechanical Construction

The high grade aluminum chassis impart a richer, more lustrous tonality with a cleaner background

and less hash and grain. All brushed anodized anti-vibration-resonance and non-magnetic chassis’s

are fully hand assembled to insure the highest level of craftsmanship.

●  Improved heat ventilation chassis

●  Custom-made machined control knobs

●  The aluminium feet are resonance absorbing types

●  Backlit “ayon” logo

●  All front & rear panel descriptions are engraved

●  4 line inputs & 1 direct input - for pure power amp operation

●  Ground switch

●  Volume & Mute function - RC

●  Metal remote commander

●  Chassis finish: black / chrome




Ayon Spirit-III

Class of Operation

Triode* or Pentode mode, Class-A*

Tube Complement 


Load Impedance

8 Ohms


12Hz - 60kHz

Output Power-Pentode mode

2 x 65 W

Output Power-Triode mode

2 x 40W

Input sensitivity for full power


Input Impedance at 1 kHz

100 KΩ



Volume Control

MCU based with analog resistor switching circuit

Remote Control



3x Line In, 1 x XLR In, 1 x Direct In


1 x Pre out

Dimensions (WxDxH) cm

48x37x25 cm


32 kg

Specifications subject to change without notice

1. 우체국등기소포(우편)으로 전국 어느 곳이든 3~4일 이내 배송이 가능합니다. (공휴일 제외)
2. 온라인 송금을 하신 경우에는 입금확인후 익일부터 배송 기간에 포함합니다. 천재지변 등 불가항력적인 사유 발생 시 그 해당기간 동안은 배송기간에서 제외합니다.
3. 주문하신 상품이 훼손되어 배달된 경우, 상품을 수령한 날로부터 20일내에 구매를 취소하실 수 있습니다.
4. 고객께서 온라인 송금으로 결제하셨을 경우 고객의 은행계좌로 송금하는 방법으로 환불하여 드립니다.
5. 주문하신 상품이 물류 특성상 다른 시간대에 배송이 될수도 있습니다.
    1. 사업자등록번호  106-01-70136      대표자:김형진    업태:도.소매  종목: 가전제품. 통신판매외     통신판매번호 2017 서울용산 0428
      서울시 용산구 청파로 74 전자랜드본관 289호 서울전자  Mail :
      입금계좌    우리은행(김형진) 180-288297-13-001     국민은행(김형진) 036-24-0186773
      02-3272-1300  02-3273-1300     김형진  010-9622-1122